Cisco Serial Gmii Specification Limits
Download ===== https://tlniurl.com/2tczip
There is no signal which defines whether the interface is in full or half duplex mode, but both the MAC and the PHY need to agree. This must instead be communicated over the serial MDIO/MDC interface. There is also no signal which defines whether the interface is in 10 or 100 Mbit/s mode, so this must also be handled using the MDIO/MDC interface. Version 1.2 of the RMII Consortium specification states that its MDIO/MDC interface is identical to that specified for MII in IEEE 802.3u. Current revisions of IEEE 802.3 specify a standard MDIO/MDC mechanism for negotiating and configuring the link's speed and duplex mode, but it is possible that older PHY devices might have been designed against obsolete versions of the standard, and may therefore use proprietary methods to set speed and duplex. Feature Value PHY clock rate 25 MBit/s RMII clock rate 10 or 100 MBit/s RF channel selection 0 (i.e. use the default) Maximum data units per data word (in units of 8) for SGMII only, in bytes
There is no signal which defines whether the interface is in full or half duplex mode, but both the MAC and the PHY need to agree. This must instead be communicated over the serial MDIO/MDC interface. There is also no signal which defines whether the interface is in 10 or 100 Mbit/s mode, so this must also be handled using the MDIO/MDC interface. Version 1.2 of the RMII Consortium specification states that its MDIO/MDC interface is identical to that specified for MII in IEEE 802.3u. Current revisions of IEEE 802.3 specify a standard MDIO/MDC mechanism for negotiating and configuring the link's speed and duplex mode, but it is possible that older PHY devices might have been designed against obsolete versions of the standard, and may therefore use proprietary methods to set speed and duplex. d2c66b5586